Vertical bands, static, or noise appear in the image. What should I do?
-
If the projected image seems to contain electronic interference (noise) or static, try the following solutions:
- Check the cables connecting your computer or video source to the projector. They should be:
- Separated from the power cord to prevent interference
- Securely connected at both ends
- Not connected to an extension cable
- Adjust the Noise Reduction setting in the projector's Picture menu.
- Select a computer video resolution and refresh rate that are compatible with the projector.
- If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting in the Picture menu to improve image quality.
- Make sure you selected the correct EDID setting in the projector's Picture menu.
- If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.
Image Quality Settings - Picture Menu
Supported Video Display Formats - Check the cables connecting your computer or video source to the projector. They should be:
Published: Oct 5, 2023
Was this helpful? Thank you for the feedback!