Support Scanners WorkForce Series Epson WorkForce ES-400

How do I scan using my product's control panel?

  • See below.

    Starting a Scan from a Scanner Button

    You can scan using the  start button on your scanner. This automatically starts Document Capture Pro (Windows) and Document Capture (OS X) and the scan job you have assigned to the button.

    Note: Make sure Epson Scan 2 and Document Capture Pro (Windows) and Document Capture (OS X) are installed on the computer connected to the scanner. Document Capture Pro (Windows) and Document Capture (OS X) do not support scanning from the  start button on your scanner over a wireless network (ES-500W). Launch Epson Scan 2 before scanning from the  start button on your scanner.

    1. Make sure the scanner is connected to your computer or network.
    2. Load an original in your scanner.
    3. Press the  start button. The scanner starts the job that was assigned to the  start button in Document Capture Pro (Windows) or Document Capture (OS X).

      Note: You can view or change the scan settings using Document Capture Pro (Windows) or Document Capture (OS X).

      Note: If your scanner is connected to one computer via USB and another computer via wireless, pressing the  start button on the scanner will save the scanned images to the wirelessly connected computer (ES-500W).

Published:  Dec 12, 2016 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​