text.skipToContent text.skipToNavigation
Home Support Printers All-In-Ones WorkForce Series Epson WorkForce Pro WP-4590

How do I set up my product for the fastest printing?

    Try these solutions:

    • Make sure your system meets the requirements for your operating system. If you are printing a high-resolution image, you may need more than the minimum requirements. If necessary, increase your system's memory.
    • If you are using Windows 7, close the Devices and Printers window before you print.
    • Clear space on your hard drive or run a defragmentation utility to free up existing space.
    • Close programs that you're not using when you print.
    • If your product is connected to a USB hub, connect it directly to your computer instead.
    • If printing becomes slower after printing continuously for a long time, the product may have automatically slowed down to protect the print mechanism from overheating or becoming damaged. Let the product rest with the power on for 30 minutes, then try printing again.

    For the fastest printing, select the following settings in your product software:

    • Make sure the paper type setting matches the type of paper you loaded.
    • Turn on any high speed settings in your product software.
    • Select a lower print quality setting.
    • Make sure Quiet Mode is not selected.
    • If the product is connected to a USB hub, disconnect unused USB devices.
    • Use a computer with a high-speed USB 2.0 port.
    • Standard EPSON Printer Software - Windows: Click the Maintenance tab, select Speed & Progress or Extended Settings, and select the following settings:
      • High Speed Copies
      • Always spool RAW datatype
      • Page Rendering Mode
      • Print as Bitmap
    Related references
    Windows System Requirements
    Mac System Requirements
    No Printer Icon Appears in Windows Taskbar
Published:  May 30, 2012 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address