Support Printers Single Function Inkjet Printers SureColor Series Epson SureColor P800 Designer Edition

How should I transport or store my product?

  • If you need to store your product or transport it a long distance, prepare it for transportation as described here.

    Caution:
    During transportation and storage, follow these guidelines: Avoid tilting the product, placing it vertically, or turning it upside down; otherwise ink may leak. Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the product from printing.

    Note: Before storing your product for a long period, replace low, expended, or expired ink to help prevent the print head from drying out. Store your product in a cool, dry place.

    1. Turn off the product.
    2. Unplug the power cable.
    3. Disconnect any connected cables.
    4. Remove all the paper from the product.
    5. Remove the roll paper unit.
    6. Close the rear paper support and the output tray.
    7. Press the front cover to open it.

    8. If you changed the control panel angle, push it down to return it to its original position.
    9. Attach the transportation lock that comes with your product to the bottom of the front manual feed tray and secure it with tape.

    10. Close the front cover and secure it with tape.

    11. Place the product in its original packing materials, if possible, or use equivalent materials with cushioning around the product. Make sure the box adequately protects the product control panel.
    12. After unpacking the product, be sure to remove all of the tape.

    Keep the product level during transportation. If print quality has declined when you print again, clean and align the print head.

Published:  Jun 28, 2016 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​