Home Support Projectors PowerLite Series Epson PowerLite Home Cinema 2000

How do I view 3D Images?

  • You can view 3D images using your projector. Viewing 3D images requires a 3D-compatible video device and a pair of Epson RF 3D glasses (not included with your projector).

    You can purchase Epson RF 3D glasses from an Epson authorized reseller.

    1. Connect a 3D-compatible video device to the projector using a compatible HDMI cable.
    2. Turn on the video device, then turn on the projector.
    3. Begin playback from the video device.

      Note: Make sure you set the video device to play content in 3D mode.

    4. Press the 2D/3D button on the remote control to activate 3D mode, if necessary.

    5. Slide the power switch on the 3D glasses to the On position.

    6. Put on the 3D glasses. If you do not see a 3D image, pair the glasses with the projector.

      Note: If you change the video source or you are not within range of your projector, the glasses will enter standby mode and the indicator light will flash green. Slide the power switch on the glasses to the Off position and then back to the On position to resume 3D viewing.

    Related references
    Pairing the 3D Glasses with the Projector
    Charging the 3D Glasses
    Viewing 3D Images
    Connecting to an HDMI Video Source
    Connecting to a Computer for HDMI Video and Audio
Published:  Sep 6, 2013 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address