Home Support Scanners Perfection Series Epson Perfection V330 Photo

How should I clean the product?

  • Do the following:
    1. Turn off the scanner.
    2. Unplug the power cord from the scanner.
    3. Clean the outer case with a cloth dampened with mild detergent and water.
    4. If the scanner glass gets dirty, clean it with a soft, dry microfiber cloth. If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner on a soft microfiber cloth to remove it. Wipe off all remaining liquid.
    5. Remove the document mat and clean the transparency unit window as described in step 4.
    Caution: Do not spray glass cleaner directly on the scanner glass; otherwise, the fluid might leak inside the scanner and damage it.
Published:  Jun 2, 2010 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address