What do my product's lights indicate?
See the table below.
Scanner Light Status
You can often diagnose problems with your scanner by checking its lights.
1 AP mode light 2 Wi-Fi light 3 ! error light 4 automatic feeding mode light 5 ready light 6 double feed detection skip light 7 slow mode light Light status Condition/solution The ! error light is flashing slowly A paper jam or a double feed has occurred. Remove any paper loaded in the input tray. If the light continues to flash, a scanner error may have occurred. Turn the scanner off and then back on again. If the error continues, contact Epson for support. The ! error light is on The scanner cover is open. Make sure the scanner cover is closed and there is no jammed paper inside. The following lights are flashing quickly:
- ! error
- AP mode
A fatal error has occurred. Try the following:
- Check the scanner connection to your computer to make sure it is secure.
- Turn the scanner off and then back on again. If the error continues, the scanner may be malfunctioning. Contact Epson for support.
The ready light is off and the following lights are on:
- ! error
- automatic feeding mode
- double feed detection skip
- slow mode
- AP mode
The firmware update has failed and the scanner is in recovery mode. Try updating the firmware again. The Wi-Fi and ! error lights are flashing slowly An access point settings error (security error) has occurred. Press the stop button to clear the error, restart the devices you want to connect to the network, then reconnect to the network. The Wi-Fi light is flashing slowly and ! error light is on The Wi-Fi (white) and ! error lights are flashing slowly A network connection error has occurred (the date and time have not been set correctly). Reset the date and time in Web Config.
Published: Jul 13, 2017 Was this helpful? Thank you for the feedback!