My product beeps continuously.

  • Either the paper release lever is in the wrong position or the Microfeed adjustment has reached its limits. If you are using the Microfeed option, this is as far as the printer will allow you to adjust the paper. If you are not using the Microfeed feature, turn the printer OFF. Move the paper release lever on the right hand side of the printer forward, then backwards. Move the lever forward and backwards five times, then turn the printer back ON. If the problem still occurs, repeat the adjustment steps again. If the problems persists, have the printer taken in to be serviced.
Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address