How should I load envelopes?

  • You can print on plain paper envelopes in this size: No. 10 (4.1 × 9.5 inches [105 × 241 mm]). Do the following:
    1. Flip the feeder guard forward.
    2. Pull up the paper support and its extension.
    3. Pull out the output tray and open the paper stopper on the end.
    4. Slide the edge guide left.
    5. Load up to 10 envelopes against the right side. Load them printable side up and flap edge left.
    6. Slide the edge guide against the envelopes, but not too tightly.
    7. Flip the feeder guard back.
      • If you have trouble loading a stack of envelopes, press each envelope flat before loading it or load one envelope at a time.
      • Do not load envelopes above the arrow mark inside the edge guide.
      • Do not load envelopes that are curled, folded, or too thin.
    8. Always follow these envelope loading guidelines:
Published:  Jul 26, 2012 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address