How do I connect my product to my wireless network using my product's control panel?

  • See below.

    Selecting Wireless Network Settings From the Control Panel

    You can select or change wireless network settings using your product control panel.

    To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software. The installer program guides you through network setup.

    Note: Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your fax and network data and settings.

    1. Press the  home button, if necessary.
    2. Select Network.
    3. Select Setup.
    4. Select Wi-Fi Setup. You see this screen:
    5. Select Wi-Fi Setup Wizard.

      Note: If you need to disable the wireless network to set up your product on an Ethernet network, scroll down and select Disable Wi-Fi instead. Then follow the instructions on changing to a wired network connection in this guide.

    6. Select the name of your wireless network or enter the name manually.

      Note: To enter the wireless network name manually, scroll down and then select Other Networks. Use the displayed keypad to enter your network name, as described in the next step.

    7. Enter your wireless password (or network name and then password) using the displayed keypad.

      Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and lowercase letters, and numeric or special characters.

      • Press the touch screen buttons repeatedly to scroll through characters.
      • Press or to move the cursor.
      • Press 1 Symb. to enter symbols.
      • Press to delete the previous character.
    8. Press Done when you finish entering your password.
    9. Confirm the displayed network settings and select Proceed to save them.

      Note: If you need to change a setting, press the  Back button.

    10. If you want to print a network setup report, press the  Start button. (Otherwise, select Done.) If the network connection is successful, the Network icon on the right side of the LCD screen is blue as shown:
    Related tasks
    Changing a Wi-Fi Connection to a Wired Network Connection
    Printing a Network Status Sheet
    Printing Fax Reports
Published:  Aug 12, 2015 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​