Support Wearables Runsense Epson Runsense SF-510

My product is not working properly. What should I do?

  • Try resetting and initializing the product. Do the following:

    Note: This process will delete all measurement data from the product. If you don’t want to lose this data, make sure to upload it to RUNSENSE View.

    1. Press all four buttons (A, B, C, and D) at the same time. The screen goes blank, then the EPSON logo appears.
    2. Skip selecting a language and units, entering your information, and setting the date and time by pressing the A button until you see the time screen. (You will be asked to enter this information again at the end of this process.)
    3. Press and hold the B button on the time screen until the Settings screen appears.
    4. Press the C or D button to highlight Sys. Settings, then press the A button.
    5. Select Initialize, then press the A button.
    6. Select Yes, then press the A button.

    The product begins initializing, which can take 4 to 5 minutes. When the product finishes initializing, the EPSON logo will appear, and you will be asked to select the language and units, enter your information, and set the date and time.

Published:  May 7, 2015 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​