Support Wearables Runsense Epson Runsense SF-510

The time changes suddenly on my product or the time is incorrect. What should I do?

  • Try the following:

    • Perform GPS positioning by pressing the C button on the time screen. The product sets the time automatically during GPS positioning.
    • Make sure the product is fully charged. If the battery charge runs low, the time may be incorrect.
    • Change the DST setting in the Sys. Settings menu. If your area is currently on Daylight Saving Time, set the DST setting to ON. If your area is not on Daylight Saving Time, set the setting to OFF.
    • Check the Time Zone setting in the Sys. Settings menu. If you traveled into a different time zone and the Time Zone setting is set to Manual, you need to manually adjust the time by doing the following:

      1. Press and hold the B button on the time screen until the Settings screen appears.



      2. Press the C or D button to highlight Sys. Settings, then press the A button.
      3. Select Time Zone, then press the A button.
      4. Select Manual, then press the A button.
      5. Press the C or D button to select the time difference between the time zone you’ve just entered and the one you left. For instance, if the new time zone is 3 hours ahead of the old time zone, select +3:00, then press the A button.
      6. Select Back as necessary to return to the time screen.

    Note: To have the time automatically change when you travel between time zones, set the Time Zone setting to Auto.

Published:  May 7, 2015 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​