Support Wearables Runsense Epson Runsense SF-110

How do I restore my product's default settings?

  • To restore the default settings, you need to reset the product and perform the initialization process. Do the following:

    1. Press all four buttons (A, B, C, and D) at the same time. The screen goes blank, then the EPSON logo appears.



      Note: If you do not want to lose measurement data stored in the product or reset any other settings, select a language and units, enter your information, and set the date and time. Otherwise, you can skip entering the information by pressing the A button until you see the time screen.

    2. Press the D button on the time screen to display the Menu screen.
    3. Press the C or D button to highlight Settings, then press the A button.
    4. Select Sys. Settings, then press the A button.
    5. Select Initialize, then press the A button.
    6. Select Yes, then press the A button.

    The product begins initializing, which can take 4 to 5 minutes. When the product finishes initializing, the EPSON logo will appear, and you will be asked to select the language and units, enter your information, and set the date and time.

Published:  Jul 13, 2015 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​