I see static or noise in the image. What should I do?

  • Check the following:
    • If you're using a computer cable longer than 6 feet (2 meters), or an extension cable, the image quality may be reduced. Use a distribution amplifier for longer distances; you can purchase one from Epson. See Optional Accessories.
    • Keep your computer and video cables away from the power cord as much as possible to prevent interference.
    • The video signal may be split between the computer and the projector. If you notice a decline in the projected image quality when the image is displayed simultaneously on your laptop computer and the projector, turn off the laptop's LCD display.
    • Make sure the correct input signal is selected in the Signal menu.
    • Make sure the cables are securely connected at both ends.
    • If still images are jittery when you are projecting from a video source, turn on the Progressive setting in the Signal menu.
    • Select Noise Reduction in the Signal menu, then try selecting NR1 or NR2.
Published:  May 8, 2009 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​