Support Projectors BrightLink Series Epson BrightLink 450Wi

Only part of the picture is displayed or the image looks distorted. What should I do?

  • Check the following:
    • Press the Auto button on the remote control or the Enter button on the projector.
    • Make sure the image Position setting is correct in the Signal menu. See Adjusting Signal Settings for more information.
    • Press the Aspect button on the remote control or select the correct Aspect setting from the Signal menu. See Resizing Video Images for details on the available options.
    • Press the Esc button on the remote control to cancel the E-Zoom function.
    • Make sure your computer's resolution setting is correct. See Compatible Video Formats.
    • You also may need to modify existing presentation files if you created them for a different resolution. See your software documentation for specific information.
    • If you're projecting a widescreen computer image, adjust the Resolution setting, if necessary. See Adjusting Signal Settings.
    • If you're projecting an image from a computer with dual display activated, turn dual display off.
    • Make sure the image is equal on all sides.
    • Turn off Keystone correction and adjust the wall plate by lowering the projection angle to reduce keystone.
Published:  May 11, 2010 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​