Home Support Projectors PowerLite Series Epson PowerLite 826W+

I get feedback noise from a microphone. What should I do?

  • Feedback noise can occur when the microphone is too close to the projector's speaker. To prevent feedback noise turn down the volume on the projector or move the microphone away from the projector's speaker.

    If you are using a wireless microphone system, the receiver's gain (or volume) may be set too high. Lower the receiver's gain/volume then adjust the projector's volume. The louder the projector's volume is set, the greater the distance you need to be away from the speaker to prevent feedback.
Published:  Feb 11, 2010 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address