Support Projectors PowerLite Series Epson PowerLite 905

I see the message No Signal. What should I do?

  • The projector has an on-screen help system you can use to solve this problem; see Using the Projector Help Displays. If the on-screen help does not solve the problem, check the following:
    • Press the Source Search button and wait a few seconds for an image to appear.
    • Turn on the connected computer or video source, and press Play to begin your presentation, if necessary.
    • Check the connection from the projector to your video sources.
    • If necessary, turn the projector and the connected computer or video source off and then on again.
    • If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
Published:  Feb 2, 2011 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​