Support Projectors PowerLite Series Epson PowerLite Home Cinema 3020

My projected image appears jittery or shaky when viewing video or moving images. What should I do?

  • If you are viewing video from a device connected to the projector's Video port or from a device connected to the projector's Component, HDMI 1, or HDMI 2 port, or a Wireless HD connection (PowerLite Home Cinema 3020e only), and the signal being sent is interlaced (480i/576i/1080i), be sure to set the Progressive setting to Film/Auto. See Sharpness and Picture Quality Settings.

    Note:
    Turning on the Progressive setting converts interlaced signals into progressive signals. Select Video for watching videos captured with a video camera. Set to Off when viewing images with a large amount of movement.

    For best results, connect your video equipment to the Wireless HD, HDMI 1, or HDMI 2 (High-Definition Multimedia Interface) ports, if possible. If your equipment doesn't support HDMI, connect it to either the Component (for high quality component video) or Video (for composite video).
Published:  Nov 30, 2012 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​