How do I use the WirelessHD Picture-in-Picture feature?

• If you have connected multiple video sources to the WirelessHD transmitter, you can use the Picture-in-Picture (P-in-P) feature to wirelessly project images from two separate sources at the same time.
  1. Press the P-in-P button on the remote control.
  2. Do the following to control the P-in-P display:
     • Press the Input button on the remote control or the WirelessHD transmitter to change the video source displayed in the sub-screen. Keep pressing the button to cycle through all of the connected video devices.
     • Press the Output button on the remote control or the WirelessHD transmitter to change the position of the sub-screen. The screen moves counterclockwise from corner to corner each time the Output button is pressed.
     • Press and hold the P-in-P button on the remote control to switch the sources shown in the main display and the sub-screen.
  3. When you are finished watching Picture-in-Picture, press the P-in-P button on the remote control to resume normal projection.