Support Projectors BrightLink Series Epson BrightLink 536Wi

How do I calibrate Pen and Touch when using the extended desktop in Windows?

  • You can calibrate the extended desktop in Windows by doing the following.

    Note: The projector must be set to extended desktop and the projector's pen mode must be set to PC Interactive.

    1. Click and then search for and select "Calibrate the screen for pen or touch input."
    2. Under the Display tab, select Setup. A new window appears.
    3. Select Pen input.
    4. Select Yes to allow changes to be made to the device.
    5. Select Enter on any screens that are not the interactive screen to close them.
    6. Tap the pen on the interactive screen and the message to tap the screen closes.

    Note: If your projector also supports touch, repeat the previous steps, but select Touch input in step 3.

Published:  Nov 9, 2020 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​