Home Support Wearables Moverio Epson Moverio BT-300

How do I connect the product to a DJI drone?

  • Before connecting the product to a drone make use the latest Moverio operating system and DJI GO or DJI GO 4 app are installed. To update the operating system, select Settings > About Device > System Updates. Download the latest version of the app from the Moverio Apps Market.

    Follow these steps to connect the product to the drone:

    1. Turn on the product.
    2. Make sure all apps are closed.
    3. Turn on the drone and its remote.

      Note: Remove any cables or devices connected to the remote.

    4. Make sure the drone and its remote are paired.

      Note: For instructions refer to the drone's manual.

    5. Connect the Type A connector to the drone's remote and micro-B connector to the product's controller with the micro USB cable included with the product.
    6. Open the DJI GO or DJI GO 4 app when prompted.
Published:  Sep 28, 2017 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address