Part of my image is blurry or out of focus. What should I do?

• If the projected image is fuzzy or blurry, try the following solutions:

  • Adjust the image focus.
  • Clean the projector lens.
  • Check the lens for condensation.

    Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.

  • Position the projector close enough to the screen, and directly in front of it.
  • Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
  • Adjust the Sharpness setting to improve image quality.
  • If you are projecting from a computer, use a lower resolution.
  • Check the resolution of your video source. If you are projecting from a standard definition video source, your image will not be as clear as an HD (720p/1080i/1080p) video source.
  • Turn off any keystone correction and disable the Quick Corner setting.
  Related tasks
  Focusing the Image Using the Focus Ring
  Cleaning the Lens
  Related references
  Projection Distance
  Image Quality Settings - Image Menu