Support Projectors Cinema Series Epson Pro Cinema 6050UB

How do I set up the projector to automatically detect and display a 4K HDR signal?

  • Connect your image source to the projector's HDMI1 or HDMI2 (Pro Cinema 6050UB only) port. In the Signal menu, select Advanced and set the Color Space and Dynamic Range settings to Auto.

    The projector will automatically detect and display compatible signals only. If you don't see an image, check the projector's Info menu to make sure you are sending a compatible 4K HDR signal to the projector. If the Color Format section of the Info menu does not display 4K BT.2020 and HDR, the signal is not compatible. See the table below for a list of signals compatible with your projector.

    Compatible Signals (Pro Cinema 4050 only)

    Display format (refresh rate) Chroma subsampling (pixel encoding) Color depth: 24 bits (8-bit per pixel) Color depth: 30 bits (10-bit per pixel) Color depth: 36 bits (12-bit per pixel)
    4K/60p (60 Hz) 4:4:4 SDR SDR SDR
    4:2:2 SDR SDR SDR
    4:2:0 SDR SDR SDR
    4K/24p (24 Hz) 4:4:4 SDR SDR SDR
    4:2:2 SDR HDR HDR*
    4:2:0 This signal does not exist.

    Compatible Signals (Pro Cinema 6050UB only)

    Display format (refresh rate) Chroma subsampling (pixel encoding) Color depth: 24 bits (8-bits per pixel) Color depth: 30 bits (10-bits per pixel) Color depth: 36 bits (12-bits per pixel)
    4K/60p (60 Hz) 4:4:4 HDR SDR SDR
    4:2:2 HDR HDR HDR
    4:2:0 SDR HDR HDR
    4K/24p (24 Hz) 4:4:4 HDR HDR HDR
    4:2:2 HDR HDR HDR
    4:2:0 This signal does not exist.

    *This signal is processed at 4:2:2 10-bit.

    You can also check your equipment's documentation for HDR output signal compatibility or contact your provider for 4K HDR streaming signal compatibility.

Published:  Feb 14, 2019 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​