I see the message Not Supported. What should I do?
If the "Not Supported" message appears, try the following solutions:
- Make sure the correct input signal is selected on the Signal I/O menu.
- Make sure the computer's display resolution does not exceed the projector's resolution and frequency limit. If necessary, select a different display resolution for your computer. (See your computer manual for details.)
- If you are projecting from an HDMI source, change the HDMI EQ Setting setting in the projector's Signal I/O menu.
- If you are projecting using a thumb-sized media streaming device, set the HDMI EQ Setting to 1 in the projector's Signal I/O menu.
Input Signal Settings - Signal I/O Menu
Published: Jan 13, 2021 Was this helpful? Thank you for the feedback!