Support Projectors LightScene Series Epson LightScene EV-115

Vertical bands, static, or noise appear in the image. What should I do?

  • If the projected image seems to contain electronic interference (noise) or static, try the following solutions:

    • Check the cables connecting your computer or video source to the projector. They should be:
      • Separated from the power cord to prevent interference
      • Securely connected at both ends
      • Not connected to an extension cable
    • Make sure the SD card is inserted correctly.
    • Check the settings on the projector's Signal menu to make sure they match the video source.
    • Select a computer video resolution and refresh rate that are compatible with the projector.
    • If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to improve image quality.
    • If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.
    Related tasks
    Connecting to a Computer for HDMI Video and Audio
    Connecting to an HDMI Video Source
    Inserting an SD Card
    Related references
    Input Signal Settings - Signal Menu
    Supported Video Display Formats
Published:  Feb 4, 2021 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​