Part of my image is blurry or out of focus. What should I do?

• If the projected image is fuzzy or blurry, try the following steps until the problem is solved.

  Note: Focus and keystone distortion of the projected image are automatically corrected under the following conditions:

  • When the size of the projected image (diagonal length) before correcting focus and keystone distortion is from 30 to 100 inches.
  • When the projection distance is about 28 to 87 inches (0.7 to 2.2 m).
  • When the installation angle of the projector toward the projection surface is within 20º right, left, up, or down.
  1. Hold down the  focus button on the remote control to perform Auto Focus.
  2. Press the  focus button on the remote control to display the focus adjustment screen and adjust focus manually.
  3. Check the following items:
     • Position the projector close enough to the screen.
     • Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
  4. Clean the projector's lens.

     Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.

  5. Adjust the Sharpness setting in the projector's Display & Sound menu to improve image quality.
     • Display & Sound > Picture > Custom > Sharpness
  6. If you are projecting from a computer, use a lower resolution or select a resolution that matches the projector's native resolution.