text.skipToContent text.skipToNavigation

How do I connect my product with a Wi-Fi Direct connection?

    See below.

    Enabling a Direct Wi-Fi Connection

    You can enable a direct Wi-Fi connection to allow direct communication between your scanner and computer or other devices without a wireless router.

    Note: While you are connected to the scanner, your computer cannot access the internet.

    1. Set the  Wi-Fi switch on the scanner to the  Wi-Fi position.
    2. Turn on the scanner.
    3. From your computer or device, search for and select the SSID shown on the label on the bottom of the scanner.

      Note: It may take a few minutes for the scanner SSID to appear in the list.

    4. Enter the password shown on the label on the bottom of the scanner. The computer connects to the scanner's wireless network. If the connection is unsuccessful, make sure you entered the password correctly.
Published:  Oct 4, 2018 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address