My product doesn't detect photos placed on the scanner glass when I use the Copy/Restore Photos option. What should I do?

  • Try the following:

    • Make sure the scanner glass is clean. Clean the scanner glass with a soft, lint-free cloth (microfiber is recommended), moistened with a little glass cleaner. Paper towels are not recommended.

      Caution:
      Do not spray glass cleaner directly on the glass, and do not press the glass surface with any force.

    • Make sure the photos are no larger than 5 × 7 inches for one photo or 4 × 6 inches for two photos.
    • When copying two photos (up to 4 × 6 inches [102 × 152 mm]), place them 1/4 inch (5 mm) apart as shown on the LCD screen.
Published:  Apr 5, 2018 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address