text.skipToContent text.skipToNavigation
Home Support Projectors BrightLink Series Epson BrightLink 455Wi

I get feedback noise from a microphone. What should I do?

    Feedback noise can occur when the microphone is too close to the projector's speaker. To prevent feedback noise, turn down the volume on the projector or move the microphone away from the projector's speaker.

    If you are using a wireless microphone system, the receiver's gain (or volume) may be set too high. Lower the receiver's gain/volume, then adjust the projector's volume. The louder the projector's volume, the greater the distance you need to be away from the speaker to prevent feedback.
Published:  Feb 11, 2011 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address