The product indicates an error. What should I do?

• The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here.

  

  1	Power light
  2	Status light
  3	Lamp light
  4	Temperature light

  Power light	Status light	Lamp light	Temperature light	Status and solution
  Blue	Blue	Off	Off	Normal operation.
  Blue	Flashing blue	Off	Off	Warming up or cooling down.
  Blue	Off	Off	Off	Standby or sleep mode.
  Flashing blue	Light status varies	Light status varies	Flashing orange	Projector is too hot. Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. Clean or replace the air filter. Make sure the environmental temperature is not too hot.
  Off	Flashing blue	Off	Orange	Projector has overheated and turned off. Leave it turned off to cool down. Once the temperature and status lights turn off and the power light turns blue (after about five minutes), try the suggestions below: Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. Clean or replace the air filter. If operating the projector at high altitude, turn on High Altitude Mode. If the problem persists, unplug the projector and contact Epson for help.
  Off	Flashing blue	Orange	Off	Lamp has a problem. Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary. Clean or replace the air filter. If operating the projector at high altitude, turn on High Altitude Mode. If the problem persists, unplug the projector and contact Epson for help.
  Flashing blue	Light status varies	Flashing orange	Light status varies	Replace the lamp soon to avoid damage. Do not continue using the projector.
  Off	Flashing blue	Off	Flashing orange	A fan or sensor has a problem. Turn the projector off, unplug it, and contact Epson for help.
  Off	Flashing blue	Flashing orange	Off	Internal projector error. Turn the projector off, unplug it, and contact Epson for help.
  Off	Flashing blue	Flashing orange	Flashing orange	Auto iris error. Turn the projector off, unplug it, and contact Epson for help.
  Off	Flashing blue	Orange	Orange	Power error. Turn the projector off, unplug it, and contact Epson for help.

  Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help.

  Related tasks
  Cleaning the Air Filter and Vents
  Replacing the Air Filter
  Replacing the Lamp
  Related references
  Projector Setup Settings - Extended Menu
  Where to Get Help
  Projector Environmental Specifications