How do I set up the projector to automatically detect and display a 4K HDR signal?

  • Connect your image source to the projector's HDMI1 or the HDMI2 (ARC) port. In the Signal menu, select Color Space and set it to Auto. Then select Dynamic Range and set it to Signal Status.

    The projector will automatically detect and display compatible signals only. If you don't see an image, check the projector's Info menu to make sure you are sending a compatible 4K HDR signal to the projector. If the Color Format section of the Info menu does not display 4K BT.2020 and HDR, the signal is not compatible. See the tables below for a list of signals compatible with your projector.

    Compatible Signals

    Display format (refresh rate) Chroma subsampling (pixel encoding) Color depth: 24 bits (8-bits per pixel) Color depth: 30 bits (10-bits per pixel) Color depth: 36 bits (12-bits per pixel)
    4K/60p (60 Hz) 4:4:4 SDR
    4:2:2 SDR HDR HDR
    4:2:0 SDR HDR HDR
    4K/24p (24 Hz) 4:4:4 SDR HDR HDR
    4:2:2 SDR HDR HDR

    You can also check your equipment's documentation for HDR output signal compatibility or contact your provider for 4K HDR streaming signal compatibility.

Published:  Sep 3, 2020 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​