What do my product's lights indicate?

• See the table below.

  Scanner Light Status

  You can often diagnose problems with your scanner by checking its lights.

  
  
  

  1	Power light
  2	automatic feeding mode light
  3	! error light

  Light status	Condition/solution
  The power light is on	The scanner is turned on and ready to scan
  The power light is flashing	The scanner is scanning, initializing, or in standby mode
  The power light is flashing and the ! error light is on	The scanner cover is open or a paper jam or double feed has occurred. Make sure the scanner cover is closed and there is no jammed paper inside. Remove and reload the originals.
  The power light and the ! error light are flashing at the same time	A fatal error has occurred. Try the following: Check the scanner connection to your computer to make sure it is secure. Turn the scanner off and then back on again. If the error continues, the scanner may be malfunctioning. Contact Epson for support.
  The power light is off and the ! error light and  automatic feeding mode light are on	The firmware update has failed and the scanner is in recovery mode. Try updating the firmware again.

  Related references
  Original Jams in Scanner
  Where to Get Help
  Related information
  Loading Originals
  Scanning