Scanning is slow. What should I do?

• If scanning becomes slow, try these solutions:

  • Scan your original at a lower resolution, if possible.
  • Make sure your system meets the requirements for your operating system. If you are scanning a high-resolution image, you may need more than the minimum requirements. If necessary, increase your system's memory or reduce the resolution.
  • Make sure you did not press the  slow mode button to slow down the scanning speed.
  • The scanning speed may be reduced depending on the image adjustment features in Epson Scan 2.
  • If scanning becomes slower after scanning continuously with the ADF for a long time, the scanner may have automatically slowed down to protect the scanner mechanism from overheating or becoming damaged. Let the scanner rest with the power on for 30 minutes, then try scanning again.
  • Make sure slow mode is turned off.
  • If you are running virus protection or other security software, exclude the TWAIN.log files from monitoring or set the TWAIN.log file as read only. See your virus protection or security software instructions for details. The TWAIN.log file is saved in C:\Users\(user name)\AppData\Local\Temp.

    Note: You may need to unhide system folders to view files in that location.

  • If you are scanning over a wireless network, factors such as interference, network traffic, or weak signal strength may affect your scanning speed (DS-575W II).
  • Computers with USB 3.0 (SuperSpeed) or USB 2.0 (Hi-Speed) ports can scan faster than those with USB 1.1 ports. If you are using a USB 3.0 or 2.0 port with the scanner, make sure it meets the system requirements.
  Related references
  Windows System Requirements
  Mac System Requirements