I've tried to install my product's software, but cannot complete the installation. What should I do?

  • See the steps below for your connection type.

    USB

    Make sure you followed the software installation instructions on the Start Here sheet. If you're still having problems, disconnect the USB cable and uninstall the printer software, then reinstall the software.

    Before reinstalling the software, check for the following:

    • Make sure the printer is not connected to your computer. (You will be prompted to connect it during the installation process.) You must connect the printer to your computer at the correct time to make sure the driver is installed correctly on your computer.
    • Make sure your system meets the requirements.
    • Make sure all applications (including any screen savers, virus protectors, and firewall software) are closed.
    • Make sure you have administrative rights or software installation privileges to your computer.
    Wireless network

    Important: Make sure you know your network's security settings before you set up your product on your wireless network. Epson will not be able to provide this information for you. If you don't know this information, you'll need to contact the manufacturer of your router or the person who set up your network.

    If you know your security settings, continue with these steps:

    1. Reset the product's network settings.
    2. Turn your router off and back on.

      Warning: If your router is connected to other devices, you may need to re-establish the connection for the other devices on the network.

    3. Set up the product for a wireless connection. Close all applications (including any screen savers, virus protectors, and firewall software) before you install the software.
    4. Uninstall the printer software, then reinstall the printer software.
    If the steps above do not help, check the additional troubleshooting tips below, then try steps 1 through 4 again.
    • If you're setting up the printer for the first time, make sure you have the correct SSID (wireless network name) and if security is enabled, the wireless network password (WEP key or WPA passphrase).

      This information is stored in your network's router and you may be able to access it by logging onto the router from your computer and checking its setup screens. If you are unable to access the information, contact the person who set up your network or the manufacturer of your router or access point for details. (Epson will not be able to provide this information to you.) You'll need to know the SSID and wireless network password before you set up the printer.

      Note: The SSID and security key or passphrase are case sensitive. Be sure to correctly note uppercase, lowercase, and numeric/special letters.

    • If your wireless router or access point is set to not broadcast its Network name (SSID), you'll need to enter the SSID manually in the printer's setup software. If your wireless router or access point has wireless security enabled, you'll also need to know what kind of security it is using. Epson will not be able to provide this information to you. If you don't know this information, you'll need to contact the manufacturer of your router or the person who set up your network.
    • Make sure the product is within range of the wireless router or wireless access point.
    • Avoid placing the printer near a microwave oven, 2.4 GHz cordless phone, or large metal objects such as a filing cabinet.
    • Check to see if access restrictions, such as MAC address filtering, are set on the router or access point. If access restrictions are set, add your product's MAC address to your router's address list. If your unsure on how to do this, contact the manufacturer of your router for instructions. To obtain your product's MAC address, print a network status sheet.
    • Disable any settings (such as AP Isolation, Client Isolation, or Privacy Separator) on your wireless router or access point that would prevent wireless devices from communicating with each other.
    • Make sure your system meets the requirements.
    • Make sure all applications (including any screen savers, virus protectors, and firewall software) are closed.
    • Make sure you have administrative rights or software installation privileges to your computer.

    Before reinstalling the software, check for the following:

    Related references
    Windows System Requirements
    Mac System Requirements

Published:  Aug 6, 2012 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​