text.skipToContent text.skipToNavigation
Home Support Printers All-In-Ones WorkForce Series Epson WorkForce WF-M1560

How do I use the control panel buttons to copy a document or ID card?

    You can copy documents onto various sizes and types of paper, including Epson special papers.
    1. Place your original document on the scanner glass, or place multi-page documents in the ADF.

      Note: Depending on the copy settings you select when copying originals placed in the ADF, your product may instruct you to copy using the scanner glass instead.

    2. Load the paper you want to print on.

      Note: Load only the recommended number of sheets.

    3. Press the Copy button. You see this screen:
    4. To print more than one copy, press the up or down arrow buttons to select the number (up to 99).
    5. To change any of the print settings displayed on the LCD screen, press the Menu button, then press the up or down arrow buttons to select the necessary settings.
    6. When you are ready to copy, press the Start button.

      Note: To cancel printing, press the Stop/Reset button.

    Related tasks
    Loading Paper for Documents
    Related references
    Automatic Document Feeder (ADF) Specifications
    Related information
    Placing Originals on the Product

    Copying ID Cards

    You can copy both sides of an ID card on one sheet of paper.
    1. Load plain paper in one of these sizes: Letter (8.511 inches [216279mm]) or A4 (8.311.7 inches [210297mm]).

      Note: Load only the recommended number of sheets.

    2. Press the Copy button. You see this screen:
    3. To print more than one copy, press the up or down arrow buttons to select the number (up to 99).
    4. Press the Menu button, press the up or down arrow buttons to select Layout, and press the OK button.
    5. Press the up or down arrow buttons to select ID Card Copy and press the OK button.
    6. To change the paper size setting, press the up or down arrow buttons to select Paper Size, press the OK button, press the up or down arrow buttons to select your paper size, and press the OK button again.
    7. When you are ready to copy, press the Start button. You see instructions on the LCD screen.
    8. Place your ID card facedown on the scanner glass.
    9. Press the Start button again. Your product scans the front side of the card.
    10. When your product finishes scanning the front side, turn the card over, then press the Start button again. Your product scans the back side of the card and then begins printing.

      Note: To cancel printing, press the Stop/Reset button.

    Related tasks
    Loading Paper for Documents
    Related information
    Placing Originals on the Product

Published:  Mar 21, 2013 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address