text.skipToContent text.skipToNavigation

How do I connect my product with a Wi-Fi Direct connection?

    See below.

    Enabling Wi-Fi Direct Mode

    You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or other devices without a wireless router or access point.
    1. Press the  home button, if necessary.
    2. Select the icon. You see a screen like this:

    3. Select Wi-Fi Direct.
    4. Select Start Setup.
    5. Select Start Setup again. You see a screen like this:

    6. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown.
    7. When you are finished, scroll down on the product's LCD screen and select OK.

      Note: You can also scan the QR Code on the LCD screen to view online setup instructions.

    8. Press the  home button to return to the Home screen. The Wi-Fi Direct icon is displayed on the LCD screen and indicates if Wi-Fi Direct is enabled on the product.

      If you are printing from a computer, make sure you installed the network software as described on the Start Here sheet.

    Related references
    Status Icon Information
Published:  May 16, 2019 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address