How do I connect my product to my wireless network using the product's control panel?

• See below.

  Selecting Wireless Network Settings from the Control Panel

  You can select or change wireless network settings using your product control panel.

  To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software by downloading it from the Epson website. The installer program guides you through network setup.

  Note: Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your fax and network data and settings.

  1. Press the  home button, if necessary.
  2. Select Wi-Fi Setup. You see a screen like this:
     
     
  3. Select Wi-Fi (Recommended).
  4. Press the OK button to proceed.
  5. Select Wi-Fi Setup Wizard.
  6. Select the name of your wireless network or select Other SSIDs to enter the name manually. Use the displayed keypad to enter your network name.
  7. Enter your wireless password.
     
     

     Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and lowercase letters, and numeric or special characters.

  8. Select OK when you finish entering your password.
  9. Do one of the following:
     • If setup was successful, press the OK button to exit.
     • If setup was unsuccessful, press the  start button to print a network setup report or press the  stop button to return to the previous menu. Repeat these steps to try again.
  10. Press the  home button to exit, if necessary. You see the icon on the Wi-Fi Setup LCD screen and should be able to connect to your product directly from your computer or device, and then print. If you are printing from a computer, make sure you installed the network software as described on the Start Here sheet.
  Related references
  Status Icon Information
  Entering Characters on the LCD Screen