My product sounds as though it is printing, but nothing prints. What should I do?

• The print head nozzles may be clogged. From the Utility section found in the EPSON printer driver, clean the print heads by performing a head cleaning followed by printing a nozzle check pattern. A head cleaning and nozzle check should be performed as a cycle. After printing a nozzle check, examine the printed pattern. Each block should be complete, with no gaps in the pattern. If there are gaps in the dot pattern, continue with another cycle. Perform up to 3 cycles if necessary. If it doesn't clear up let the printer sit over night to allow the dried ink to soften. If the nozzle check is not printing completely, and if the head cleanings do not help the nozzle check pattern to print completely, try replacing the ink cartridge. Caution: If you have already installed a cartridge which is missing the blue label, or if a previously installed ink cartridge was missing its blue label at the time it was installed, and now head cleanings do not help the nozzle check pattern to print completely, your printer may require service and you should contact Epson technical support for further assistance.