The displayed image is not rectangular. What should I do?

• If the projected image is not evenly rectangular, try the following solutions:

  • If the projector is not mounted on the wall or ceiling, place it directly in front of the screen, lining up the lens with the center of the screen, if possible.
  • Use the Image Shift setting to adjust the image position, rather than moving the projector.
  • Press the keystone buttons on the projector to adjust the image shape.
  • Adjust the image shape using the individual Geometry Correction settings in the Installation menu.

    Note: If the projector is mounted on the wall, always use the adjustment dials on the mount to center the image.

  Related tasks
  Correcting Image Shape with Arc Correction
  Correcting Image Shape with the Keystone Buttons
  Correcting Image Shape with Quick Corner
  Related references
  Installation Settings - Installation Menu
  Image Quality Settings - Image Menu