-
Store
Buy Direct
-
Printers
Printers
- Home & Home Office
- Office Printers & Copiers
- Professional Imaging
- Label Printers & Presses
Office Printers & CopiersResourcesApplicationsProfessional ImagingLabel Printers & Presses - Ink
-
Projectors
Business & EducationLarge Venue
-
Scanners
Scanners
-
Point of Sale
Point of Sale
- Receipt Printers
- Label Printers
- Check Scanners & Validation Devices
- Kitchen Display Systems
Receipt PrintersResourcesApplicationsLabel PrintersResourcesApplicationsCheck Scanners & Validation DevicesResourcesApplicationsKitchen Display SystemsResourcesApplicationsSAT -
Robots
Industries
- Industries
-
Support
Downloads not available on mobile devices.
Please select your operating system above.
** By downloading from this website, you are agreeing to abide by the terms and conditions of Epson's Software License Agreement.
- What is the minimum ceiling height required to install the AP-60 with an Epson projector and still meet the 80' minimum ceiling height that many states require?
- What is the optimal classroom size for the AP-60?
- Is the AP-60 sound mono or stereo?
- Why is the power button on the microphone orange instead of green?
- How do I make an audio recording with the AP-60?
- Why does the pendant microphone volume go down when I turn the volume down of a DVD player from the remote?
- Why does the AP-60 turn off when sound is coming through the speakers?
- Is there a way to adjust the tone of the microphone?
- Will there still be sound from my product if I connect the AP-60 to the Audio Line Out port of my product?
- How do I install the dome sensor into a dropped or false ceiling?
- How do I make an audio recording with the AP-60?
- Do I need to add a second IR dome sensor if I add a second mic?
- Will the Infrared (IR) microphone cause or be affected by cross-talk or other interference from adjacent classrooms?
- How should I position the pendant microphone to achieve the best sound quality?
- Can I use a wired microphone with the system?
- Can I use a mono or stereo microphone?
- Is there any sort of protection built into the AP-60 circuitry to prevent excessive sound from damaging the speakers?
- Is there a way to adjust the tone of the microphone?
- Is the AP-60 sound mono or stereo?
- How can I tell the difference between the mono and stereo cables?
- Which should I set up first: the pendant microphone or the line audio sources?
- My voice sounds muffled. What should I do?
- Why does the pendant microphone volume go down when I turn the volume down of a DVD player from the remote?
- Why does the AP-60 turn off when sound is coming through the speakers?
- Will sound come out of all four speakers if I use only 1 device?
- Will there still be sound from my product if I connect the AP-60 to the Audio Line Out port of my product?
- Will the microphone cause or be affected by cross-talk or other interference from adjacent classrooms?
- There is too much microphone feedback. What should I do?
- Why do I hear a scratching sound when I move?
- What is the optimal classroom size for the AP-60?
- Is it necessary to mount the AP-60 with a projector below it?
- What is the minimum ceiling height required to install the AP-60 with an Epson projector and still meet the 80' minimum ceiling height that many states require?
- Can I use my existing 1.5' product mounting pipe to install the AP-60?
- How much space do I need to leave between the AP-60 and the ceiling to allow for proper ventilation?
- Can the IR dome sensor cable be installed into the space above a dropped ceiling?
- Can I use the ELPMBUNI ceiling mount with the AP-60?
- Can I use the wall mount for the PowerLite 410W short throw lens with the AP-60?
- How do I install the dome sensor into a dropped or false ceiling?
- Two different types of AA batteries were included with the AP-60. Which batteries belong in the remote, and which belong in the microphone?
- How do I access the audio connections on the AP-60?
- How do I install the dome sensor on a solid ceiling?
- What can I control with the product's remote control?
- Can I purchase an additional pendant microphone?
- How many IR dome sensors can I connect to the AP-60?
- When should a second IR dome sensor be used with the AP-60?
- Why do you use IR (infrared) microphones instead of RF (radio frequency) microphones?
- What is the maximum cable length recommended when using a wired microphone?
- Does the AP-60 support USB microphones?
- What is the power watt rating for the AP-60?
- Is the AP-60 compatible with Dynamic or Condenser microphones?
- Does the AP-60 support microphones requiring Phantom Power?
- Can I use the RS-232 port to control the AP-60 with a device, such as a wall-panel control?
- How do I install the AP-60 with a PowerLite 410W and a wall mount?
- Are there any optional accessories for the AP-60?
- Can I set the AP-60 on a table instead of installing it on the ceiling?
This document contains an overview of the product, specifications, basic and in-depth usage instructions, and information on using options.
This document provides an overview of various connection methods.
This document will assist you with product unpacking, installation and setup.
This document gives an overview of the product as well as technical specifications, available options and warranty information.
This document contains information such as tips for using the product or common questions and answers.
This document provides complementary or late-breaking information to supplement your product documentation.
This document lists part numbers and descriptions for user replaceable parts.
Service Center Locator
For products in warranty, please contact Technical Support. If your product is out of warranty, find a service center.
Find a LocationEmail Epson Support
If you are unable to find an answer on our web site, you can email your question to Epson Support.
Email UsContact Us
Phone :
(562) 276-4394
Hours :
Monday – Friday 7 am – 4 pm (PT)
Mail :
3131 Katella Ave.
Los Alamitos, CA 90720