What settings do the DIP switches control?

• The LQ-850+ and LQ-1050+ have two 8-position DIP switches. These
  switches are located at the rear of the printer.
  
  International character set/Graphics character set
  SW 1-1, 1-2, 1-3 see table 1 and 2
  
  

  Switch	ON	OFF
  1-4	Graphic Characters	Italic Characters
  1-5	Unidirectional Graphics	Bidirectional Graphics
  1-6	High speed draft	Normal
  1-7	CSF Enabled	CSF Disabled
  1-8	1" Skip over Perf	Skip over Perf Inactive

  
  

  Page Length	SW 2-1	SW 2-2
  11 inches	OFF	OFF
  12 inches	ON	OFF
  8.5 inches	OFF	ON
  11.7 inches	ON	ON

  
  

  Interface/Parity	SW 2-3	SW 2-4
  Parallel	OFF	OFF
  Serial/Even	ON	OFF
  Serial/Odd	OFF	ON
  Serial/None	ON	ON

  
  

  Baud Rate	SW 2-5	SW 2-6
  9600	OFF	OFF
  19200	ON	OFF
  1200	OFF	ON
  300	ON	ON

  
  

  Switch	ON	OFF
  SW 2-7	Tear Off Mode ON	Tear Off Mode OFF
  SW 2-8	CR Produces CR + LF	CR Only

  Table 1 International Character Set
  
  

  Country	SW 1-1	SW 1-2	SW 1-3
  USA	ON	ON	ON
  France	ON	ON	OFF
  Germany	ON	OFF	ON
  United Kingdom	ON	OFF	OFF
  Denmark	OFF	ON	ON
  Sweden	OFF	ON	OFF
  Italy	OFF	OFF	ON
  Spain	OFF	OFF	OFF

  Table 2 Graphics Character Sets
  
  

  Graphics Type	SW 1-1	SW 1-2	SW 1-3
  United States	ON	ON	ON
  Multilingual	ON	ON	OFF
  Portugal	ON	OFF	ON
  Canada-French	ON	OFF	OFF
  Norway	OFF	ON	ON