I'm having paper feed problems. What should I do?
If your EPSON Stylus Scan doesn't feed paper, feeds multiple Pages, or paper is jammed, removed the jammed paper, then remove and replace the stack of paper. Finally, press the load/eject button. Make sure of the following: Paper isn't old, creased, damp, or too thin. The edge guide is resting against the stack of paper. Paper isn't loaded above the arrow on the edge guide. If paper doesn't eject fully, you may have set the wrong paper size. Press the load/eject button to eject the paper. Then make sure you select the correct paper size in your application or print settings. Fan the stack of paper and then even the edges before loading it. Make sure your EPSON Stylus Scan is on a stable, level surface. Check for missing rubber feet on the bottom of the unit.
Was this helpful? Thank you for the feedback!