How should I transport my product?

  • For short moves, you can just pick up the EPSON Stylus Scan 2500 by the handles on the side and set it down. For longer moves, you need to repack it in its original box and lock the print head and transportation lock. Do the following:
    1. Turn on the EPSON Stylus Scan and wait until the print head locks in position. Then turn off the EPSON Stylus Scan.
    2. Unplug the power cord, and then disconnect the interface cable.
    3. Open the document and maintenance covers.
    4. Push the transportation lock right (as you are facing the printer) to lock the scanner carriage.
    5. Close the maintenance and document covers.
    6. Remove all paper from the sheet feeder, and then remove the paper support.
    7. Push in the output tray extension. Caution: To avoid damage, always leave the ink cartridges installed when transporting the EPSON Stylus Scan. Also, remember to lock the print head and the transportation lock. Push in the output tray extension. Lock the transportation lock. Note: Tape the print head to the right side from the front of the printer.
    8. Use tape to secure the document cover. Secure the ink cartridge holder to the printer with tape.
    9. Use the original box and packing materials to repack the EPSON Stylus Scan.
    10. Keep the EPSON Stylus Scan level during transport. Caution: Be sure to remove the tape used in step 8 before printing.
Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​