What do the product's lights indicate?
The status light indicates the following:
- The scanner may not be properly connected to your computer or your software may not be fully installed. To make sure the scanner is correctly installed, see the Start Here sheet for instructions.
- The scanner and/or the transparency unit transportation lock is locked. Slide the lock to the unlock position.
- The scanner cover cable or optional Automatic Document Feeder cable is not connected to the scanner's OPTION port. Connect the cable to the port.
NOTE: Before connecting or disconnecting the scanner cover cable or the Automatic Document Feeder cable, turn off the scanner using its power switch.
|Green||On||Ready to scan.|
|Flashing||Initializing (warming up) or scanning.|
|Orange||Flashing||An error has occurred.*|
|(None)||Off||The scanner is off.|
Published: Aug 24, 2007 Was this helpful? Thank you for the feedback!