Support Scanners DS Series Epson DS-320

What do my product's lights indicate?

  • See the table below.

    Scanner Light Status

    You can often diagnose problems with your scanner by checking its lights.



    1 ! error light
    2  automatic feeding mode light
    3 Ready light
    Light status Condition/solution
    The ! error light is on and the ready light is flashing A paper jam or a double feed has occurred. Remove any paper loaded in the input tray. If the light continues to flash, a scanner error may have occurred. Turn the scanner off and then back on again. If the error continues, contact Epson for support.
    The scanner cover is open. Make sure the scanner cover is closed and there is no jammed paper inside.
    The following lights are flashing separately or simultaneously:
    • ready
    • ! error
    A fatal error has occurred. Try the following:
    • Check the scanner connection to your computer to make sure it is secure.
    • Turn the scanner off and then back on again. If the error continues, the scanner may be malfunctioning. Contact Epson for support.
    The ready light is off and any of the following lights are on:
    • ! error
    •  automatic feeding mode
    The firmware update has failed and the scanner is in recovery mode. Try updating the firmware again.
Published:  Jan 16, 2017 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​