How do I load plastic cards in the input tray?

• You can load plastic cards that meet the card specifications in the input tray.
  1. Pull up the input tray extension, extend the output tray, and flip up the stopper.
     
     
     
     
  2. Slide the input tray edge guides all the way out.
     
     
     
     
  3. Load up to three standard plastic cards horizontally in the input tray as shown, sliding them in until they meet resistance. Make sure the printed side is facedown and top edge first.
     
     
     
     

     Note: You can load only one embossed plastic card at a time. Do not load plastic cards vertically.

     
     
     
     
     
  4. Slide the edge guides against the edges of the plastic card.
     
     
     
     
  5. Set the page separation lever to the position shown here.
     • When scanning a single embossed plastic card:
       
       
       
       
     • When scanning up to 3 standard plastic cards:
     
     
     

     Note: To prevent paper jams, make sure to set the separation lever back to its original position when scanning standard single- or multi-page documents.