What settings do the DIP switches control?

• The LQ-860 has two 8-position DIP switches. These switches are
  located inside the printer cover to the left of the control panel.
  International character set/Graphics character set
  
  SW 1-1, 1-2, 1-3 see table 1 and 2
  
  

  Switch	ON	OFF
  SW 1-4	Graphic Characters	Italic Characters
  SW 1-5	Unidirectional Graphics	Bidirectional Graphics
  SW 1-6	High Speed Draft	Normal
  SW 1-7	CSF Enabled	CSF Disabled
  SW 1-8	1" Skip over Perf	Skip over Perf Inactive

  
  

  Page Length	SW 2-1	SW 2-2
  11 inches	OFF	OFF
  12 inches	ON	OFF
  8.5 inches	OFF	ON
  11.7 inches	ON	ON

  
  

  Interface/Parity	SW 2-3	SW 2-4
  Parallel	OFF	OFF
  Serial/Even	ON	OFF
  Serial/Odd	OFF	ON
  Serial/None	ON	ON

  
  

  Baud Rate	SW 2-5	SW 2-6
  9600	OFF	OFF
  19200	ON	OFF
  1200	OFF	ON
  300	ON	ON

  Table 1 International Character Set
  
  

  Country	SW 1-1	SW 1-2	SW 1-3
  USA	ON	ON	ON
  France	ON	ON	OFF
  Germany	ON	OFF	ON
  United Kingdom	ON	OFF	OFF
  Denmark	OFF	ON	ON
  Sweden	OFF	ON	OFF
  Italy	OFF	OFF	ON
  Spain	OFF	OFF	OFF

  Table 2 Graphics Character Sets
  
  

  Graphics Type	SW 1-1	SW 1-2	SW 1-3
  United States	ON	ON	ON
  Multilingual	ON	ON	OFF
  Portugal	ON	OFF	ON
  Canada-French	ON	OFF	OFF
  Norway	OFF	ON	ON