How do I change the lock-out mode settings?

  • You can select which printer functions you want to be locked while lock-out mode is on. Do the following:
    1. Make sure paper is loaded and the printer is turned off.
    2. Turn on the printer while holding down the LF/FF and Pause buttons. The printer enters the lock-out setting mode and prints the instructions. (You_ll need three sheets of A4 or letter size single-sheet paper or three pages of continuous paper that is at least 279 mm [11 inches] long and 210 mm [8.3 inches] wide.)
    3. Follow the instructions to change the settings as desired.
    4. Turn off the printer.
Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address