I'm having paper feed problems. What should I do?

  • Check the following:
    • If paper doesn't feed, remove it from the sheet feeder. Reload it against the right side, behind the tab, then press in the tab on the left edge guide and slide it against the paper. Make sure the paper is not above the arrow mark inside the edge guide.
    • If multiple pages feed at once, remove the paper from the sheet feeder, fan the edges to separate the sheets, then reload it.
    • If the paper doesn't eject fully, you may have set the wrong paper size. Press the Stop button, then raise the scanner and remove the paper. Select the correct paper size before you reprint.
    • If it's wrinkled when it ejects, the paper may be damp or too thin. Load new paper.
    • Make sure you use new, smooth, high-quality paper that is not curled, creased, old, or too thin. Load it printable side up.
    • Don't load hole-punched paper.
    • Don't load more than the recommended number of sheets. If you're printing on both sides of the paper, try loading fewer sheets.
    • Paper type
      Load up to
      this many sheets
      Plain paperApproximately 120
      Epson Bright White Paper
      Epson Presentation Paper Matte
      Approximately 80
      Epson Photo Paper Glossy
      Epson Premium Photo Paper Glossy
      Epson Ultra Premium Photo Paper Glossy
      Epson Premium Photo Paper Semi-gloss
      20
      Epson Premium Presentation Paper Matte
      Epson Premium Presentation Paper Matte Double-sided
      Epson Photo Quality Self-adhesive Sheets
      Epson Iron-on Cool Peel Transfer Paper
      1
    • If the paper jams, do the following:
      1. Try turning the Epson Stylus NX200 Series off and then back on, to eject the jammed paper.
      2. Gently pull any jammed paper out from the output tray or sheet feeder.
      3. If that doesn't work and paper is stuck inside, turn off the Epson Stylus NX200 Series. Open the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus NX200 Series back on.
Published:  Sep 10, 2008 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​