How do I set up my product?

  • See the instructions below for your connection type:

    Network Connection
    (Wireless or Wired)

    1. If you're connecting to a network, use an Ethernet cable such as the one that came with your printer.
    2. Ethernet network cable (included)
      IMPORTANT:
      Connect the cable for either a wireless or wired connection. For a wireless connection, you'll remove the cable later.
    3. Install your software using the Network Installation Guide.

    Direct Connection (USB)
    1. If you are NOT installing your product on a network, connect it using a USB cable (not included).

      You can purchase a USB cable at most electronics stores.
    2. USB cable (not included)
    3. Set up your product and install your software as described on the Start Here sheet.
Published:  Aug 20, 2008 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address